Table of Contents
Advertisement
TROUBLESHOOTING
Problem
Water on the floor
Unit will not turn on
Unit is on, but fan is not
running
Possible Causes
Drain Tube is not connected.
Drain Tube connection may be
loose.
The fuse is blown / circuit break-
er is tripped.
Dehumidifier has reached the
humidity level set on the control
panel.
Power Failure.
For any questions or Technical Support, please call
customer service
Solutions
Install the Drain Tube onto the Drain Port on the back of the
unit. See the PRODUCT SETUP Section on Page 6.
Check the Drain Tube connection. See the PRODUCT SET-
UP Section on Page 6.
Check the house fuse / circuit breaker box and replace fuse or
reset breaker.
The dehumidifier automatically turns off when the set humid-
ity level is met. To continue operation, reduce humidity set-
ting or activate Continuous Mode.
There is a protective time delay (up to 3 min.) to prevent trip-
ping of the compressor overload. For this reason, the unit may
not start normal dehumidification for 3 min. after it is pow-
ered back on.
877-665-9765
Hide quick links:
Advertisement
Table of Contents
