Table of Contents
Advertisement
2.1
UNPACKING
Unpack and visually inspect the recorder. Normal shipment includes the following:
•
Box of 100 Charts.
•
Pen assortment for each recorder pen
If the recorder has either the V-type pens or reservoir pens, the pen assortment consists
of a 1/2 ounce bottle of ink with a dropper assembly for each pen color. When the
recorder has the optional fiber-tip pens, the assortment consists of a spare pen clip and
three pen cartridges for each pen color.
•
Clock key for spring-wound clock.
A clock key is supplied in a small envelope taped to the recorder door for the spring
wound clock.
•
"C" cell battery for battery operated clock.
The recorder door is wrapped in plastic to prevent scratches during shipping and handling. it
is recommended that the plastic be left in place until the recorder is installed.
2.2
MOUNTING
Select a mounting location where there is minimum vibration. The ambient temperature
should be within the limits listed under 1.2 Technical Characteristics.
If the recorder has a thermal system or volumetric pressure system, untie capillary being
careful not to kink it. Unwind the capillary by unrolling, and make ready for connection to the
process. Do not remove protective covering from bulbs of seal elements until ready to make
the process connection.
Mount the recorder in a vertical position. Mounting dimensions are shown in Figure 2 for either
panel or surface mounted using the reversible mounting brackets (MD-J-076-17 at back of
book). Additional mounting diagrams are in the back of the book. See MD-J-076-19 for the
handle and feet option. See MD-J-076-20 for the 2 inch vertical pipe option. See MD-J-076-21
for the differential or absolute pressure meter body element options.
Pressure, volumetric pressure, thermal system, and electrical connections enter the recorder
through either the bottom or back of the case. Allow for access to these connections when
mounting. Note that connections enter through both the bottom and back on 3-pen recorders.
2
INSTALLATION
76J Pneumatic Fulscope Recorder
INSTALLATION
7
Advertisement
Table of Contents
