Mitsubishi Q series Programming Manual page 86

4 SFC PROGRAM CONFIGURATION
[Program Examples]
(1) The following program turns ON Y20 when block 3 is active.
Related Instructions
a) SFC control instructions
• Block START instruction (sBLm)
and block END instruction (rBLm) ................................See Section 4.4.6
b) SFC diagram symbols
• Block START step ( Bm
c) SFC information device
• Block START/END bit ....................................................See Section 4.5.1
4 - 47
aBL3
oY20
, Bm ) .............................See Sections 4.2.8
MELSEC-Q
and 4.2.9
4 - 47