Control Specifications - Panasonic MIR-H163-PA Service Manual

Control Specifications

1. Keys on Control Panel
BZ (Alarm stop key)
CALL (Call key)
Numerical Shift Key
(UP key)
Digit Shift Key
(SHIFT key)
POWER
(Power switch)
To stop buzzer during intermittent buzzer is sounding (auto set
temperature alarm).
If this key is pressed again after buzzer is stopped, intermittent
buzzer does not sound again.
Even if this key is pressed when displayed numbers are not blinking,
buzzer does not sound.
Not in operation : Set temperature, set time and chamber
temperature are displayed in turn by
pressing CALL key.
In operation : Remaining time, set temperature, set time
and chamber temperature are displayed in
turn by pressing CALL key.
In function : Accept function code and data.
setting mode Press the key during temperature or time
setting mode, store the set value and return
to chamber temperature display.
Increase each digit value by 1 during setting mode.
Keep pressing for about 5 seconds when chamber temperature
is displayed to show F00 and become function code input mode.
(use UP key and SHIFT key to input function code and press
CALL key to enter input function mode.)
Shift blinking digit from left to right during setting mode. Shifted
digit is different based on set data.
Power switch to turn ON/OFF for control panel.
Press this key when there is no display at numerical value displayed
area after power switch is ON (only POWER key is acceptable) to
show chamber temperature and make other keys acceptable.
Press this key again to return "no display" condition.
Press this key during operation to stop operating and move to "no
display" condition.
Press this key during temperature or time setting, store the set value
and move to "no display" condition.
-8-