Jabra CRUISER Quick Start Manual page 5

EN
end a call
- Tap the answer/end button on your speakerphone to end an active
call.
make a call
- The call will automatically transfer to your speakerphone*. If not tap
the answer/end button.
play or pause music
- Tap the play/pause/stop button to play or pause music.
stop music
- Press (approximately 2 seconds) the play/pause/stop button.
Change between music tracks*
- Tap next track or previous track button.
adjust sound and volume*
- Tap volume up/volume down button to adjust the volume level. (In
FM mode your are not able to adjust volume via Jabra CRUISER – use
your car stereo).
sleep mode
- When disconnected from the phone, the speakerphone turns off
automatically after 10 minutes. Tap the answer/end button to turn the
speakerphone on again.
*Phone dependent
EN
using Fm transmitter
The FM transmitter in the speakerphone allows you to transmit calls and
music from your phone to the car stereo.
- Connect your phone and your speakerphone.
- Tap the FM button to enter FM mode. The FM status icon will turn
solid red and an FM frequency will be announced.
- Manually turn your radio into the same FM frequency and you are
now ready to transmit calls or music from your phone to your car
stereo.
- The FM transmitter will automatically turn off after 10 minutes if the
function is not used.
Change Fm frequency
Jabra CRUISER will always transmit calls and music on the most recently
used FM frequency. However if sound performance is unsatisfactory it is
possible to select a new FM frequency.
- Enter FM mode.
- Press volume up button until "searching" is announced.
- When a new frequency is found and announced, tune your radio
manually into the same FM frequency.
A tap on the volume up/volume down button will change the frequency
on your Jabra CRUISER by 0.1 MHz.