Turning Your Speakerphone On And Off; Using Your Speakerphone - Jabra CRUISER Quick Start Manual

EN
please NoTe: Before using your new Jabra CRUISER Speakerphone,
you must fully charge it and set it up by 'pairing it' with your selected
device.
1. About your JAbrA CruISEr SPEAKErPHoNE
1 Answer/end button
2 FM button
3 Volume up/volume down button
4 Charging socket
5 On/off button
6 Play/pause/stop button
7 Next track
8 Previous track
9 Battery status icon
10 Call status icon
11 Connection status icon
12 FM status icon
13 Visor clip
2. CHArGING your SPEAKErPHoNE
Insert charger and remove when fully charged and the Battery status
icon turns green.
EN

3. turNING your SPEAKErPHoNE oN ANd off

Slide the on/off button to turn the speakerphone on or off.
4. PAIrING tHE SPEAKErPHoNE WItH your PHoNE
First time pairing:
Turn the speakerphone on and it will automatically be in pairing mode.
The Connection status icon will flash rapidly.
later pairing:
- Turn the speakerphone on and press answer/end button for 5 seconds.
- Release the button when the Connection status light flashes rapidly
and you hear the voice announcement "pairing mode".
- Activate on your phone.
- Search for devices and select Jabra CRUISER.
- Press "OK" on the phone and confirm with PIN code 0000 (4 zeros).

5. uSING your SPEAKErPHoNE

answer a call
- The name of the incoming caller is announced if phonebook access is
supported by your phone. If not, only the number will be announced.
- Tap the answer/end button on your speakerphone to answer a call.