E-MANUAL UPDATE
1. Using a PC, copy the E-Manual Update directory onto the root of a USB memory device (as
shown).
Caution: When copying the E-Manual firmware/directories onto the USB drive,
2. Insert the USB memory device into an active USB port on the machine and execute
Test Simulation 49-03.
Note: "If no USB device is detected, an error message will be displayed.
3. Select the Directory containing the update files - example shown = MANUAL:-
Note: For MXC310/380 series, enter the folder number containing the E-Manual firmware
and press the shortcut key
28
do not change the folder hierarchy or files.
on the operation panel.
SHARP