Tape Handling - Polaroid DVC-2010 User Manual

VCR Setting
CHANNEL
• Operates in stop mode.
• Press VCR button to select VCR mode and follow the
procedure below.
1 Press the SETUP button on the remote control.
2 Press the button to highlight and select (Enter) the
"Channel Set".
3 Selecting cable or antenna viewing
• You must set the viewing mode for your VCR, choosing either
CABLE (cable system connection) or ANTENNA(antenna
connection). To set the viewing mode:
• Press ENTER to toggle between CABLE and ANTENNA.
4 SELECT "Manual Set"
Move into "Manual set" with
and press ENTER. Memorize channel and select the desired
channel when ENTER button is pressed, "Erase" converts into
ON-SCREEN MENU LANGUAGE
1 Press the SETUP button on the remote control. The initial
MENU is displayed.
2. Press the button to select "Language Select" and press
SETTING THE OSD DISPLAY
• Press DVD/VCR button to select VCR mode
1 Press the SETUP button on the remote control.
2. Press the button to highlight and select "Option", and
press ENTER button.
AUTO POWER OFF
• Press DVD/VCR button to select VCR mode
1 Press the SETUP button on the remote control.
2. Press the button to select "Option", and press ENTER
button.
RF OUT
• Press VCR button to change into VCR mode
1. Press the SETUP button on the remote control.
2. Press the button to select "Option", and press
ENTER button.

Tape Handling

1. Do not use the following:
-Tape with mold
-Tape stained with juice or attachments
-Disassembled tape
2. Moisture condensation may occur and damage tape.
Moisture condensation damages the tape. Please use the tape
after the moisture condensation is disappeared.
3. After use, store tape vertically.
button to select either add/erase
"Add".
Press NUMBER button and
select the desired channel to memorize.
To check the memorized channels, press CH+/- button on
remote control. To delete Channels Manually, when ENTER
button is pressed, "Add" converts into "Erase". Press NUMBER
button and / button on the remote control to select the
desired channel to delete.
To check the deleted channels, press CH+/- button on remote
control.
5 SELECT "Auto Preset"
• Press button in Channel Set to highlight "Auto Preset"
• Press ENTER button to detect the channel automatically.
ENTER button
3 Select the language among English, Spanish and French.
3. Press ENTER button until the appropriate system is
selected.("On" or "Off")
4. Please press SETUP button to quit.
3. Press the button to select "Auto Power Off".
4. Press ENTER button, until the appropriate system is
selected.("Yes" or "No")
5. Press SETUP button to quit.
3. Press the button to select the "Output Channel".
4. Press ENTER button, until the appropriate system is
selected. ( "CH3" or "CH4" )
5. Press SETUP button to quit.
4. Do not store in the following places:
-High temperature and humidity
-Subject to direct sunlight
-Near strong magnetic materials such as speakers
10
/ button of remote control to