Philips DVDR3305/02 Service Manual page 10

EN 10 4. 3139 785 3093x
4.1.3 Dismantling of the Basic Engine
1) Remove the Cover Tray (See 4.1.1).
2) Remove the 4 screws 260 to free the Basic Engine.
Figure 4-5
3) Place the Basic Engine in the service position by fl ipping
the basic engine to the vertical position
Figure 4-6
Mechanical Instructions
4.1.4
3
3
Dismantling of the Digital Board
1) Remove the 4 screws 272 to loose the Digital Board as
shown in Figure 4-7.
4
4
Figure 4-7
2) Service Position can be achieved by fl ipping the Digital
board to the Vertical Position as shown in Figure 4-8.
Figure 4-8
Note: The cable (just to transfer the service connection to the
analog board) from socket 1101 can be removed and use for
hyperterminal connection.