Removing An Empty Film Pack; Framing The Subject - Polaroid ProCamCamera User Manual

10 Removing an empty film pack
Remove the empty film pack
when loading a new
pack into the camera.
When the film pack is
empty, the picture
counter on the control
panel sets to zero and
you will hear three chimes when the
camera is open and when the shut-
ter button is pressed.
Push the film door release but-
ton on the front of the camera. Pull
the colored tab to remove the
film pack.

Framing the subject

The wide-angle lens of the
ProCam allows you a wider field
of view to capture more in your
photograph. The lens also allows
you to photograph subjects from
18 inches (46cm) to infinity. The
flash is designed to be used for
every picture - outdoors and
indoors.
indoors: For best results, your
subject should be from 18 inches
to 18 feet (46cm to 5.5m) away
and near a light-colored
background.
Outdoors: Your subject should be
at least 18 inches (46cm) away.
Keep the sun behind you or to
your side.