Table of Contents
Advertisement
Physical Mode / Type
Line Speed(Kbps)
DownLink/UpLink
Active Mode
Info
After finished the above settings, click OK to save the settings.
I
I
-
1
-
1
-
1
W
I
I
-
1
-
1
-
1
W
Ethernet is the Physical Mode for WAN1 to WAN4.
Available settings are explained as follows:
Item
Enable
Display Name
Physical Mode
Physical Type
Line Speed
Vigor3220 Series User's Guide
Display the physical mode and physical type of such WAN
interface.
Display the downstream and upstream rate of such WAN
interface.
Display whether such WAN interface is Active device or
backup device.
Backup (WAN#)- Display the backup WAN interface for such
WAN when it is disabled.
In default, each WAN port is enabled.
A
N
1
~
W
A
N
4
(
E
t
h
e
A
N
1
~
W
A
N
4
(
E
t
h
e
Description
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
You can change the physical type for
WAN1/WAN2/WAN3/WAN4 or choose Auto negotiation for
determined by the system.
If your choose According to Line Speed as the Load
Balance Mode, please type the line speed for downloading
r
n
e
t
)
r
n
e
t
)
49
Advertisement
Table of Contents
