Using Wireless Keys - DSC IoTega User Manual

Chapter 5.0 Using Wireless Keys

5.0 Using Wireless Keys

In addition to the keypad, you can control your system with two-way wireless keys. All wireless
key buttons are programmable. Your installer can verify the functions for each key.
Using a two-way wireless key, you can arm or disarm the system while you are in close proximity
to your house, or you can call for help.
The following wireless keys are compatible with the IoTega system:
PG4929/PG8929/PG9929
6
7
3
4
1. Away Arm
2. Stay Arm
3. Disarm
4. Panic
5. Command Output 1
6. Message LED
7. Status LEDs
Note: The panic feature is disabled on PG9929 and PG9939 for SIA CP-01 certified installations.
A user at Master or Administrator level can assign wireless keys to users on the touchscreen
keypad.
To assign a wireless key, complete the following steps:
1. From the main menu, tap Users.
2. On the upper right corner of the screen, tap the wireless key icon.
3. Tap a wireless key, then tap user to assign the key.
To arm the system with a wireless key, press the desired arming mode button when the Ready indic-
ator is on.
Note: When arming the system with a two-way wireless key, the system squawks once to indicate
the system is armed.
To disarm the system with a two-way wireless key, do the following steps:
1. Press the disarm button.
2. If you walk through the entry door, the keypad will beep. Press the disarm button within ____
seconds to avoid an alarm condition.
Note: When disarming the system with a two-way wireless key, the system squawks twice to indic-
ate the system is disarmed.
PG4939/PG8939/PG9939
5
5
2
1
2
1. Away Arm
2. Stay Arm
3. Disarm
4. Panic
5. Command Output 1
6. LED
1
6
3
4
- 14 -
PG4949/PG8949/PG9949
2
1. Away Arm
2. Disarm
3. Panic
1
3