Table of Contents Safety Precautions Plasma Display LED Indicators Remote Control Unit Installing the plasma Monitor Basic Operation Using the Remote Control Basic Adjustments: Video Source PC Source Settings Menu Specifications Troubleshooting...
Safety Precautions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Warning The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Page 5
FCC Statement of Compliance Class B Computing Device Information to User This equipment has been tested and found to comply with the limits for a Class B Digital Device pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Plasma Display Front view 1. Status LED indicator 2. IR Receiver for remote control 3. Standby/on LED indicator Shown with optional Extension Speaker Cabinet & Display Stand. (Sold Separately.)
Page 7
Right view 1. STANDBY/ON button 2. VOLUME +/- buttons (Not used in this application.) 3. CHANNEL +/- buttons (Not used in this application.) 4. INPUT button (Not used in this application.)
Page 8
Rear view 5. SYSTEM CABLE terminal (BLACK) (Not used in this application.) 6. DVI VIDEO INPUT CABLE terminal (WHITE) 7. AC INLET terminal 8. POWER switch Shown with optional Extension Speaker Cabinet & Display Stand. (Sold Separately.)
LED Indicators Plasma Display LED indicator STATUS Flash Blue Flash Blue Condition AC power off The AC power is off Standby The power LED lights up in red to indicate standby mode when AC power is on. Standby to on Only lights when power switches from standby to on mode.
Remote Control Button labels Turns on the power to the Plasma Display or places it into standby mode Digits 0 - 9 Access to main input #0~9 directly GUIDE/WIDE Select aspect ratio SELECT Select an OSD option when the OSD is active Up/down/left/right arrows Navigate up/down/left/right in the OSD INFO...
Installing the Plasma Display Locating • Avoid direct sunlight. Maintain adequate ventilation. • Because the Plasma Display is heavy, be sure to have someone to help you when moving or mounting it. Note Allow enough space around the upper and back parts when installing to ensure ventilation around the backside of the Plasma Display.
Basic Operation Using the Remote Control Use the remote control unit by pointing it towards the remote sensor window. Objects between the remote control unit and sensor window may prevent proper operation. Inserting batteries Install batteries in the remote control unit before using: 1.
Basic Adjustments for VIDEO Source Use the menu to change the options. Press MENU. ←/→ 2. Press to select “VIDEO” source. ↑/↓ 3. Press to select the desired option, and then press SELECT. 4. Press MENU to exit the menu. VIDEO ●...
Page 14
Basic Adjustments for VIDEO Source (continued) PICTURE MODE ● MOVIE STANDARD VIVID SPORTS For Picture mode Item MOVIE STANDARD VIVID SPORTS VIDEO PICUTURE MODE ● BRIGHTNESS CONTRAST SATURATION SHARPNESS 1. Press MENU. ←/→ 2. Press to select “VIDEO” source. ↑/↓ 3.
Page 15
Basic Adjustments for VIDEO Source (continued) For Video source Item ←button →button BRIGHTNESS For less brightness For more brightness CONTRAST For less contrast For more contrast SATURATION For less saturation For more saturation For less color intensity For more color intensity SHARPNESS For less sharpness For more sharpness...
Basic Adjustments for PC Source ● AUTO COLOR TEMP CLOCK PHASE POSITION AUTO Auto image adjustment. 1. Press MENU. ←/→ 2. Press to select “PC” source. ↑/↓ 3. Press to select “AUTO”, and then press SELECT. ←/→ 4. Press to select the desired parameter—“YES” or “NO”, and then press SELECT.
Page 17
Basic Adjustments for PC Source (continued) Color Temp ● Warm Normal Cool Item Warm Normal Cool CLOCK Clock adjustment 1. Press MENU. ←/→ 2. Press to select “PC” source, and then press SELECT.. ↑/↓ 3. Press to select “CLOCK”, and then press SELECT. ←/→...
Page 18
Basic Adjustments for PC Source (continued) POSITION Adjusts the vertical and horizontal positions of displayed images. 1. Press MENU. ←/→ 2. Press to select “PC” source. ↑/↓ 3. Press to select “POSITION”, and then press SELECT. ↑/↓ 4. Press to select “X” or “Y”, and then press SELECT. ←/→...
Basic Adjustments for Settings Menu For SETTING source OSD LANGUAGE You can select a language to be used for the on-screen display of menus from three languages; English, French and Spanish. 1. Press MENU. ←/→ 2. Press to select “SETTING” source”. ↑/↓...
Page 20
Basic Adjustments for Settings Menu (continued) TRANSPARENCY To adjust the transparency degree of OSD. 1. Press MENU. ←/→ 2. Press to select “SETTING” source”. ↑/↓ 3. Press to select “TRANSPARENCY”, and then press SELECT. 4. Press ←/→ to select the desired level and then press SELECT. 5.
For service, support and warranty information, visit 1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call 01-800-400-2443. “Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and licensed for use on the PLA-4260MTR to Petters Consumer Brands, LLC.