Wheel Installation; Wheel Nut Torque Specifications - Polaris TRAIL BLAZER 330 Owner's Manual

Wheels

Wheel Installation

1. Place the transmission in gear and lock the parking brake.
WARNING
Improperly installed wheels can adversely affect tire wear and
vehicle handling, which can result in serious injury or death.
Always ensure that all nuts are torqued to specification. Do not
service axle nuts that have a cotter pin installed. See your
Polaris dealer.
2. Place the wheel on the wheel hub with the valve stem toward the
outside and rotation arrows on the tire pointing toward forward
rotation.
3. Install the wheel nuts and finger tighten. On vehicles with tapered
rear wheel nuts, make sure the tapered ends of the nuts fit into the
tapers on the wheels.
4. Lower the vehicle to the ground.
5. Torque the nuts to specification.

Wheel Nut Torque Specifications

Check the wheel nut torques occasionally and when they've been
loosened for maintenance.
Item
Front Wheel Nuts
Rear Wheel Nuts
Front
27 ft. lbs.
(37 Nm)
MAINTENANCE
Specification
27 ft. lbs. (37 Nm)
50 ft. lbs. (68 Nm)
Rear
50 ft. lbs.
(68 Nm)
77