Sony GTK-XB60 Operating Instructions Manual page 24

Enjoying the Wired Party Chain
1
Turn on all the systems.
2
Activate the Wired Party
Chain function on the system
to be used as the Party Host.
Example: When using this system
as the Party Host
 Press FUNCTION
repeatedly to select the
function you want.
When you connect using 
(page 22), do not select the
Audio In function. If you select
this function, sound cannot be
output.
 Start playback and then press
PARTY CHAIN on the rear of the
unit.
The PARTY CHAIN indicator
lights up. The Party Host starts
the Wired Party Chain, and other
systems become Party Guests
automatically. All systems play
the same music as that being
played by the Party Host.
3
Adjust the volume on each
system.
Notes
• Depending on the total unit of systems
you have connected, Party Guests may
take some time to start playing the music.
• Changing the volume level and sound
effect on the Party Host will not affect the
output on the Party Guests.
• For detailed operation on other systems,
refer to the operating instructions of the
systems.
24
GB
To select a new Party Host
Only when you connect using 
(page 22), you can select a new
Party Host. Repeat step 2 of "Enjoying
the Wired Party Chain" on the system
to be used as a new Party Host. The
current Party Host becomes Party
Guest automatically. All systems play
the same music as that being played
by the new Party Host.
PAIRING
• You can select another system as the new
• If the selected system does not become a
To deactivate the Wired Party Chain
Press PARTY CHAIN on the Party Host.
If the Wired Party Chain function is not
deactivated after a few seconds, press
PARTY CHAIN on the Party Host again.
The PARTY CHAIN indicator on the
unit lights up or flashes to show the
system status.
System status
Party Host
Party Guest
Notes
Party Host only after the Wired Party Chain
function of all the systems in the chain
has been activated.
new Party Host after a few seconds, repeat
step 2 of "Enjoying the Wired Party Chain."
Note
Party Chain indicator
Indicator status
Lit up
Flashing