Checking Supplied Items; Part Names And Functions; Front View; Dip Switches - Roland Color CAMM PC-50 User Manual

1 Checking Supplied Items

Check the following to make sure that you received all the items that were shipped along with the unit.
Power Cord
Cleaning Sheet
for Printing Head
PC-50 DRIVER for windows 95
PC-50 DRIVER for windows 3.1

2 Part Names and Functions

2-1 Front View

Printing Carriage
The ribbon cartridge is mounted here.
Pinch Roller (Left)
Press material against the grit roller. When loading
material, place the left roller inside the left edge of the
material to correctly track it through the machine.
Cleaning pad
* Please do not remove
this pad.
Removing it may
result in breakdown.
Material Alignment
Sticker
Platen
Guide Line
Align the material with
these lines when loading.
Thermal transfer ribbon cartridge
Roller Base
User's Manual
Grit Roller
Operation Panel
1 Checking Supplied Items / 2 Part Names and Functions
Blade
Blade Holder
(Carbide)
Material for Test Cuts
Cutting Carriage
The blade holder is mounted here.
Pinch Roller (Right)
This presses the material against the grit roller.
Cutter Force Control Slider
Sets the down force for the cutting tool.

DIP Switches

Used to make various settings.
Parallel (Centronics) Input
Connector
In a parallel configuration, connect
the parallel cable here. This cable
carries data to your computer.
Cutter Tool
Head Cleaner
Serial (RS-232C)
Input Connector
In a serial configuration,
connect the serial cable
here. This cable carries
data to your computer.
3