Parking Mode - Rollei CARDVR-308 User Manual

3.4 Parking Mode

To monitor the vehicle when it is parked, you can activate Vibration
Detection, or Motion Detection.
Follow the steps below to change the settings for Parking Mode:
1. Press the
2. Press the
select Parking Mode, and then
press the
confirm.
3. Press the
configure Parking Mode (Off /
Vibration Detection / Motion
Detection), and then press the
button to complete setting.
4. Press the
to recording screen.
• Off: No parking monitoring activated.
• Vibration Detection:
- If disconnected external power supply when the device is
powered on, the system alert message "Press OK to
power off or enter Vibration Detection after 10 sec".
This means the system will power off and enter Vibration
Detection automatically in 10 seconds.
- Once Vibration Detection Mode is triggered, when the
device detects any vibration, it will automatically power on
and start recording, the event will be recorded for 60
seconds (per file).
- In this mode, the device is powered off until event
happens. This mode is more power saving.
- To disable this function, in the vibration detection
recording, press any key to wake up the screen, and
resume to normal loop recording; or when the car
button to enter the main menu.
/
or button to
button
or button to
button to return
23
to