Using The Drive Recorder; Automatic Record - Rollei CARDVR-308 User Manual

3

Using the Drive Recorder

3.1 Automatic Record

Once start the car engine, the device will automatically power on
and start recording.
Recording will automatically stop when the engine is switched off.
Note:
1. Some vehicle power supply would not turn on / off automatically with the car
engine start, if the device cannot automatically power on / off with the car
engine, please manually connect the power supply with the vehicle power,
and then power on, or manually power off the device and then release the
connector with the vehicle power supply.
2. It can be configured to save a video file for every 30 seconds, 1 or 3 minutes
of recording. Please refer to Record Interval (4.1).
3. All the videos and photos are saved in the memory card, if memory card is full,
loop recording will generally overwrite the oldest video file.
18