Chapter 2
Understanding the Access Point GUI
DHCP Tab
The Configuration DHCP tab (see
DHCP server.
The following parameters can be set for the LAN interface:
•
•
•
•
•
•
•
Figure 2-6
Configuration–DHCP Tab
IP Address—Set the IP address.
Subnet Mask—Set the IP net mask.
Default Gateway—Set the default gateway.
DHCP Server—Enable/disable the DHCP server functionality on the LAN.
DHCP Starting IP Address—Set the start of the IP address range that the DHCP server will use.
DHCP Ending IP Address—Set the end of the IP address range that the DHCP server will use.
DHCP Lease Time (minutes)—Set the time for which the DHCP leases will be valid.
Figure
2-6) contains the fields necessary for configuring the local
Cisco Aironet 1810 Series OfficeExtend Access Point User Guide
Configuration Page
2-9