Table of Contents
Advertisement
SIRIUSRadio.book Page 24 Tuesday, November 21, 2006 5:15 PM
example, Volume Control is now
Set to Receiver).
Adding a Device to Volume
Lock
From LOCK VOLUME, press Scroll
1.
Left ( ) or Scroll Right ( ) to
get to ADD DEVICE TO VOLUME LOCK.
Press OK.
The remote displays USE < > TO
2.
SELECT VOLUME SOURCE THEN PUSH
OK. Scroll to the device you want
to lock, then press OK.
3.
As soon as you press any key,
the remote displays the name of
the device being locked and the
name of the locking device. For
example, if you add TV2 to
Volume Lock that is Locked to
Receiver, the remote displays
LOCK TV2 TO RECEIVER.
4.
Press Scroll Left ( ) or Scroll
Right ( ) to select the device and
press OK to add that device to
current volume setting. The
remote displays the name of the
device you added to Volume Lock
(For example, TV2 has been added
to Volume Lock).
The remote displays Push OK to
5.
add another device or push Set to
Exit.
6.
Press OK to add another device
to Volume Lock, or press SET to
exit.
Removing a Device from
Volume Lock
From LOCK VOLUME, press Scroll
1.
Left ( ) or Scroll Right ( ) to
get to REMOVE DEVICE FROM VOL
UME LOCK. Press OK.
The remote displays REMOVE
2.
DEVICE FROM VOLUME LOCK.
3.
As soon as you press any key,
the remote displays the name of
the device being removed from
Volume Lock. For example, if you
remove TV2 from Volume Lock
24
that is locked to the receiver, the
remote displays Remove TV2 from
Volume Lock.
4.
Use Scroll Left ( ) or Scroll
Right ( ) to select the device to
remove. Press OK to remove it.
The remote displays the name of
the device you removed from
Volume Lock (For example, TV2
has been removed from Volume
Lock).
The remote displays Push OK to
5.
remove another or push Set to
Exit.
6.
Press OK to add remove another
device from Volume Lock, or
press SET to exit.
Using Key Mover
Key Mover allows you to copy keys
around the remote control, within a
device, or from one device to another.
To use Key Mover, perform the
following steps:
From ADVANCED SETUP, press
1.
Scroll Left ( ) or Scroll Right
( ) to find KEY MOVER. Press OK.
The remote displays ADD KEY
2.
MOVER. Press OK.
The remote displays FIND SOURCE
3.
MODE PUSH OK. On the bottom line,
the remote displays the source
mode (for example, Satellite).
4.
Press Scroll Left ( ) or Scroll
Right ( ) to find the source mode
for the key you intend to move.
Press OK.
The remote displays Select
5.
Source Key to Copy. All keys
except SET, Scroll Left ( ),
Scroll Right ( ), and SIRIUS are
available for Key Mover.
6.
Press the key you wish to copy.
The wireless controller displays
Find Destination Mode Push OK.
Press Scroll Left ( ) or Scroll
Right ( ) to find the destination
SIRIUS LCD Wireless Controller
Advertisement
Table of Contents
