System; Settings - Barco KVD User Manual

4.5 System

4.5.1 Settings

Use this page to view how long the Green BCM server is up and running.
Manage
Green BCM Box (GBCM) can also control an NGP-200 running Windows 7 (WSM-200 Workstation Mini). When the
system goes to Standby it will shut down the WSM-200 before disconnecting it from power. When starting up the
system the WSM-200 will also start. This document describes the configuration steps to be executed on the WSM-
200 so it can be shut down and started by the GBCM.
Enter the permanent IP address or PC host name and click Apply. The gBCM will PING the PC; and, if successful,
establish a connection.
To configure the WSM-200 you need to download the Key! Click on the link.
For configuration of the WSM-200, see
The host name is subject to following restrictions:
Host name limitations:
Host name labels may contain only the ASCII letters 'a' through 'z' (case-insensitive), the
digits '0' through '9', and the hyphen (-).
Host name labels cannot begin or end with a hyphen.
No other symbols, punctuation characters, underscores or blank spaces are permitted.
Avoid using only numerical characters or names consisting entirely of hexadecimal digits
('0' through '9' plus the letters 'A' through 'F').
Do not use names longer then 15 characters
Do not start your computer name with a numerical character.
Barco - Barco Wall Control Manager OVD/KVD/IVD - R591337 - user manual - Revision 04 - March-2016
8 Controlling a WSM-200 with gBCM
4. Green BCM web interface
_______________________________________________
26