Controlling A Wsm-200 With Gbcm; Configuration For Startup - Barco KVD User Manual

8 Controlling a WSM-200 with gBCM

The WSM-200 has two network interfaces. One of the network interfaces is connected to
the WALL network of gBCM.
Make sure that on WSM-200 for the network connection to gBCM the Windows firewall is
Off.

8.1 Configuration for startup

To make startup working correctly, the BIOS setting of the WSM-200 need to be adjusted.
Check/apply the following settings:
Tab
Advanced
Chipset
Barco - Barco Wall Control Manager OVD/KVD/IVD - R591337 - user manual - Revision 04 - March-2016
Parameter
AC Power Loss State
Wake on LAN
8. Controlling a WSM-200 with gBCM
Value
Always ON
Enabled
_______________________________________________
59