Steering Inspection And Adjustment - Polaris 120 Owner's Manual For Maintenance And Safety

ADULT SECTION
Maintenance

Steering Inspection and Adjustment

The steering assembly of the
machine should be checked
periodically for loose nuts and
bolts. See A,B,C,D,E, F, and
G in illustration at right.
With handlebars in straight
ahead position and measuring
from the straight edge of the
skis, the measurement
between the skis at point H
should be 1/8 inches greater
than point I, as shown on the
following page.
NOTE: This measurement
should be taken with
the vehicle weight
compressing the
suspension. If the
skis are misaligned,
we recommend that
your dealer make the
necessary
adjustments.
76
G
A
F
E
D
C
H
I
B