NETGEAR PowerLEAP WiFi 1000 Quick Start Manual page 14

Connect to the PowerLEAP Access Point
You can connect your wireless devices (laptop, tablet, or smartphone) to
the PowerLEAP access point manually or automatically.
¾ To manually connect to the PowerLEAP access point:
1. On your computer or wireless device (tablet, smartphone), open the
software that manages your wireless network connections.
2. Connect to the PowerLEAP wireless network (SSID).
3. Enter the network key (passphrase).
Your wireless device is now connected to the PowerLEAP access point
and you can surf the web.
¾ To automatically connect to the PowerLEAP access point
using a WPS button:
1. Press and hold the WPS button on the PowerLEAP for 2 seconds and
release it.
The Wireless LED starts to blink.
2. Press the WPS button on your wireless device for 2 seconds and
release it.
When the Wireless LED stops blinking, your wireless device is
automatically connected to the PowerLEAP access point and you can
surf the web.
14