NETGEAR PowerLEAP WiFi 1000 Quick Start Manual page 12

8. Click Apply.
Your changes are saved.
9. When you are finished with the wireless settings, disconnect the
Ethernet cable from the PowerLEAP.
Now you can connect your wireless devices to the PowerLEAP access
point. See
Connect to the PowerLEAP Access Point
¾ To set up WiFi access using the browser setup guide:
1. On your computer or wireless device (tablet, smartphone), open
the software that manages your wireless network connections and
connect to the PowerLEAP network.
Note: The default network key (wireless security password) and the
default wireless name (SSID) for 2.4GHz operation are printed on the
product label. The SSID format is NETGEARxx_EXT at 2.4GHz and
NETGEARxx-5G_EXT at 5GHz.
2. On the same computer or wireless device, open a web browser
window.
The browser takes you directly to the onscreen setup guide. If it does
not, enter one of the following into the browser address bar:
www.mywifiext.net
www.netgearextender.net
12
.
on page 14