PRESONUS StudioLive Series III Owner's Manual page 24

Rackmount digital mixing and remote i/o system with avb
Hide thumbs Also See for StudioLive Series III:
Table of Contents

Advertisement

5
Resources
5.1
Stereo Microphone Placement
Drum Overheads (XY example)
Snare Drum (top and bottom)
Point a dynamic microphone at the center of the snare, making sure it is placed so
that the drummer will not hit it. Place a small-diaphragm condenser microphone
under the drum, pointed at the snares. Experiment with the placement of
both microphones. Also experiment with inverting the phase of the bottom
microphone. This technique can be used in live applications.
StudioLive™ Series III Rack Mixers
Owner's Manual
Place two small-diaphragm
condenser microphones on an XY
stereo-microphone holder (bar).
Position the microphones so that
each one is at a 45-degree angle,
pointed down at the drum kit,
approximately 7 or 8 feet above the
floor or drum riser. Experiment with
height. This technique can be used in
live applications as well.
20

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Studiolive 16rStudiolive 32rStudiolive 24r

Table of Contents