IBM ThinkPad 310E User Manual page 104

The following figure and table shows the possible memory
combinations.
Slot 1
16MB (base)
16MB (base)
16MB (base)
32MB (option)
Caution
Do not use any DIMMs other than the IBM ThinkPad 310
DIMMs.
6
Position the card at an angle
firmly, aligning the notch in the slot. Then push the module
down until it locks into place
The DIMM should fit into the slot at a slight angle.
Increasing Memory Capacity
Slot 2
None
16MB (option)
32MB (option)
32MB (option)
, and push it into the socket
.
Chapter 6. Installing and Removing Options
6-9