Download
Share
Print this page
FUTABA T8FG Instruction Manual
  1. Manuals
  2. Brands
  3. FUTABA Manuals
  4. Control Unit
  5. T8FG
  6. Instruction manual
FUTABA T8FG Instruction Manual

FUTABA T8FG Instruction Manual

Radio control
Hide thumbs Also See for T8FG:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
T8FG-2.4G
T8FG
Radio Control
Instruction Manual
INTRODUCTION
Thank you for purchasing a Futaba digital proportional R/C system. In order for you to make the
best use of your system and to use it safely, please read this manual carefully. If you have any
difficulties while using your system, please consult the manual, our online Frequently Asked
Questions (on the web pages referenced below), your hobby dealer, or the Futaba Service
Center.
Owner's Manual and Additional Technical Help
This manual has been carefully written to be as helpful to you, the new owner, as possible.
There are many pages of setup procedures and examples. However, it need not be your sole
resource of setup guidelines. For example, the back cover includes a quick-start set of
instructions and the Frequently Asked Questions web page referenced below includes this type
of step-by-step setup instructions for a variety of other model types.
Due to potential unforeseen changes in production procedures, the information contained in this
manual is subject to change without notice. No part of this manual may be reproduced in any
form, at any time, without prior permission.
Support and Service: It is recommended to have your Futaba equipment serviced annually
during your hobby's "off season" to ensure safe operation.
Futaba Corporation
1

Advertisement

loading

Related Manuals for FUTABA T8FG

Summary of Contents for FUTABA T8FG

  • Page 1 Instruction Manual INTRODUCTION Thank you for purchasing a Futaba digital proportional R/C system. In order for you to make the best use of your system and to use it safely, please read this manual carefully. If you have any difficulties while using your system, please consult the manual, our online Frequently Asked Questions (on the web pages referenced below), your hobby dealer, or the Futaba Service Center.

  • Page 2: In North America

    HOW TO ACCESS to FAQ: http://www.futaba-rc.com/ OUTSIDE NORTH AMERICA Please contact your Futaba importer in your region of the world to assist you with any questions, problems or service needs. Please recognize that all information in this manual, and all support availability, is based upon the systems sold in North America only.
  • Page 3 T8FG-2.4G Instruction of the T8FG Power Switch 1. Location SW-H SW-F SW-E SW-G SW-A SW-D SW-C SW-B Left Stick Right Stick Touch sensor Hook for neck strap Fig. 1-1 Front view Charge jack DSC connector Fig.1-2 Rear view Futaba Corporation...
  • Page 4 T8FG-2.4G Battery lid (Slider type) Fig. 1-3 Bottom view Ni-MH battery SD Card slot Fig 1-4 Battery box 2. Charging the battery 1-1. Please confirms the power switch is off. 1-2. Insert the plug of the charger to charging bush of transmitter.

  • Page 5: Servo Monitor

    T8FG-2.4G 3. Operation of the touch sensor Operation Contents Condition Working Touch part Short touch At the screen have some pages. The cursor jumps to top of next (Ex. P-MIX screen) page At the screen have Only one(１) The cursor jumps the top of page.
  • Page 6 T8FG-2.4G Scrolling Outline At the moving cursor mode The cursor is moved. of “RTN” Input data mode Increment or decrement the data. Select Yes or No, and so on. 4. Turns on the transmitter 4-1 Power switch is to be on. The red LED is light. LCD displays the bar graph at moment.
  • Page 7 T8FG-2.4G 5. Basic operation of editing LCD screen is consists of editing button and monitor display. You can go through editing menu by touch sensor. If you want t o go back to previous menu, you move the cursor to screen title and touch “RTN”.
  • Page 8 T8FG-2.4G 7. Linkage menu The linkage menu sets the primary data of the each model. These data are common to every flight condition. If you touch “LNK” of the touch sensor over 1 second, you can get into the linkage menu screen.
  • Page 9 INSTRUCTIONS MANUAL FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications.