Fujitsu IP-920 E/DC Hardware User's Manual page 70

Chapter 4 Cable specifications
(8) DC power cable (attached to IP-920E/DC)
Connector
①
④
②
③
Front view
Pin assignment
Order
Manufacturer
(9) In case of using non-attached DC power cable
Use a connector, cable and plug that meet the following conditions.
[IP-920E/DC Connector] Equivalent to HA216P-4S(72) / Allowable current: 5A and above /
[Cable] Size: 0.5 square millimeter and above / Allowable current: 5A and above /
Nominal voltage: 60V and above
[Plug] Although it depends on the opposite device, select a plug of more than 5A-allowable
current and more than 60V-nominal voltage. If you need a specialized tool when
making a cable, ensure to use the matching item from the same maker as the plug's
maker.
Please refer to the next page for the method of wire connection with IP-920E/DC connector.
IP-920E/DC
XLR (Female)
<IP-920E/DC>
－
①
N.C ②
N.C ③
＋
④
・DC Power cord (normally attached) 3m：
TA77057-3000
・DC Power cord (length specified) Maximum length 3m：
TA77057-xxxx
Order example:TA77057-0500(0.5m),TA77057-2000(2.0m)
FUJITSU LIMITED
Nominal voltage: 60V and above
56
XLR (Male)
<External device>
－
①
② N.C
③ N.C
＋
④