Installation Preparations - Fujitsu IP-920 E/DC Hardware User's Manual

4.1
4.1
A type of IP-920E/DC installation work is shown below.
IP-920E/DC
ANALOG AUDIO
IN
SDI
IN
ANALOG VIDEO
IN
232C
HDMI
IN
10/100BASE
LAN
INPUT DC +12-24V
When constructing a system that uses IP-920E/DC, consideration must be given so that its boundary
between IP-920E/DC and other devices is similar to that shown in the above figure. Since the type of
work may change depending on the system, procure equipment and perform work based on
consultations with a system designer.

Installation Preparations

External device
Audio adapter cable#1
(Attached or separate order)
or
Audio adapter cable#3
(separate order)
D-sub9
(separate order)
BNC
BNC
D-sub9
HDMI
RJ45
(IP-920E/DC)
XLR
(1) XLR cable
XLR
(2) XLR cable
(3) Coaxial cable
(4) Coaxial cable
(5) RS-232C cable
(6) HDMI cable
(7) LAN cable
(8) DC Power cable
49
Chapter 4 Cable specifications
Analog audio output device
(mic, etc)
Digital video (HD/SD-SDI) output device
(incld embedded audio)
(Camera, etc)
Analog video output device
(Camera, etc)
Device with RS-232C interface
Digital video (HDMI) output device
(Camera, etc)
Device with LAN interface (HUB, etc)
Power source DC+12-24V
(SELV Output)
IP-920E/DC