7. Click Protocol and then click Add. The Select Network Protocol window is displayed.
8. Click Internet Protocol (TCP/IP)
Properties window is redisplayed.
9. Click Internet Protocol (TCP/IP)
(TCP/IP) Properties window.
10. Be sure Obtain an IP address automatically and Obtain DNS server address
automatically are selected.
11. Click OK to save the TCP/IP settings and exit the TCP/IP Properties window.
12. Click OK to exit the Local Area Connection Properties window.
13. Click OK when prompted to restart the computer and click OK again.
14. When you complete the TCP/IP configuration, go to
2000 or Windows
2 Getting Started
This document is uncontrolled pending incorporation in PDM
Figure 10 Select Network Component Type window
,
and then click OK. The Local Area Connection number
Figure 11 Local Area Connection Properties window
,
and then click Properties to display the Internet Protocol
XP.
Verifying the IP Address in Windows
29