Cabling The Lan; Sbg901 Light Activity During Startup; Connecting The Sbg901 - Motorola surfboard sbg901 User Manual

Check that the lights on the front panel cycle through this sequence:
Light
POWER
RECEIVE
SEND
ONLINE

Cabling the LAN

After connecting to the cable system, you can connect your wired Ethernet LAN. Some sample
connections are shown in
proper drivers for the Ethernet adapter. Detailed information about network cabling is beyond the
scope of this document.
2 Getting Started
This document is uncontrolled pending incorporation in PDM
Figure 7 Connecting the SBG901
Table 4 SBG901 Light Activity During Startup
Description
Turns on when AC power is connected to the SBG901.
Indicates that the power is connected properly.
Flashes while scanning for the downstream receive channel.
Changes to solid green when the receive channel is locked.
Flashes while scanning for the upstream send channel.
Changes to solid green when the send channel is locked.
Flashes during SBG901 registration and configuration.
Changes to solid green when the SBG901 is registered.
Wired Ethernet LAN. On each networked computer, you must install
26