Universal Serial Bus Ports - Intel G4V500-B User Manual

2.5.5 Universal Serial Bus Ports

USB 2
USB 1
Two onboard USB 2.0/1.1 ports (Black) are at location CN7 of the
system board.
JUSB1 (USB 3-4) and JUSB2 (USB 5-6) connectors allow you to
connect 4 additional USB 2.0/1.1 ports. One card-edge bracket,
mounted with USB ports, is provided with the system board. If you
want to use the optional USB ports, install the card-edge bracket to
the system chassis then insert the connector that is attached to the
USB port cables to JUSB1 or JUSB2.
BIOS Setting
Enable or disable the onboard USB in the Integrated Peripherals
submenu of the BIOS. Refer to chapter 3 for more information.
Driver Installation
You may need to install the proper drivers in your operating system
to use the USB device. Refer to your operating system's manual or
documentation for more information.
Hardware Installation
USB 3-4
USB 5-6
1 0
2
1 9
USB 3/4/5/6
33
2