Table of Contents
Advertisement
●
Side view
5. Handle
6.
button
7.
button
8.
button
9.
buttons
10.
button
11. CVBS connector (BNC)
12. USB downstream port
8
Chapter 1 Introduction
Handles for transportation
Enables or disables touch panel operation.
The button lights up blue when touch panel operation is enabled.
Note
• Two buttons are provided. You can use either one of them according
to the installation position of the monitor.
• Touch panel calibration (sensitivity adjustment) can be carried out by
holding down the button for two seconds with touch panel operation
enabled.
Displays the Adjustment menu, or cancels adjustment / setting.
Displays the signal name that is currently input, or determines an item
of the Adjustment menu and saves adjusted values.
Adjusts the brightness, or selects an Adjustment menu item and adjusts
/ sets functions.
Turns the power on or off.
To turn the power off, hold down
progress bar is shown on the screen, then the power is turned off.
Inputs video signal.
Connects to a peripheral USB 2.0 device.
for five seconds or more. The
Advertisement
Table of Contents
