Setting Up Honeywell N-1000 Access Points; Setting Up Honeywell N-1000 Access Point Parameters - Honeywell N-1000 Settings Manual

Reader / Number of bit in access card
CR-1 Wiegand Card Swipe / 26 bit-generic
NR-1 Magstripe, NR5 / 32 bit
CI-1 Wiegand Card Insert / 26 bit
PR-1-280 Cotag Proximity / 32 bit
HG-1 Hand Geometry / 32 bit
5 Conductor Keypad / 32 bit
Dorado Magstripe Cards / 34 bit
Sielox Wiegand Cards / 34 bit
Sielox Proximity Cards / 32 bit
8. On setting panel of
Setting up controller of

Setting up HoneyWell N-1000 access points

Setting up access points of
1. Setting up access point parameters.
2. Setting up access point readers.

Setting up HoneyWell N-1000 access point parameters

Setting up access point parameters is carried out on setting panel of
basis of N1000 panel object on
Setting up access point parameters is carried out the following way:
1. Go to setting panel of
8
HID / 34 bit
N1000 panel object click
HoneyWell N-1000 ACS is completed.
HoneyWell N-1000 ACS
Hardware tab of
N1000 door object.
Access card format
26-S-1-D-1-B1-B2-B3-B4
32-S-0-D-0-B1-B2-B3-B4
34-S-1-D-1-B1-B2-B3-B4
26-I-1-D-1-B1-B2-B3-B4
32-S-0-D-0-B1-B2-B3-B4
32-S-0-D-0-B1-B2-B3-B4
32-S-0-D-0-B1-B2-B3-B4
34-S-1-D-0-B1-B2-B3-B4
34-S-1-D-1-B1-B2-B3-B4
32-S-0-D-0-B1-B2-B3-B4
Apply to save changes.
controller is carried out the following way:
N1000 door
System settings dialog box.
object. This object is created on the