Setting A Programme - AEG LAVAMAT68480FL User Manual

14 www.aeg.com
When you set a prewash option, put the
detergent for prewash phase directly into
the drum.
1.
A
3.
B
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
• Do not set the prewash option.
• Do not set the delay start (or Finish in option).
10.5 Activating the appliance
Press and hold for a couple of seconds
the On/Off button to activate or
deactivate the appliance.
A tune sounds when the appliance is
activated.
The display shows the word On.

10.6 Setting a programme

1. Touch the programme button
Programmes and set the
programme:
10.4 Liquid or powder
detergent
2.
4.
• The indicator of the button Start/
Pause flashes.
• The display shows the
programme duration.
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an
option, the indicator of the set
option comes on.
If you set something
incorrect, the display shows
the message .