Introduction; Overview - NetComm NTC-6908 User Manual

Introduction

Thank you for purchasing an Industrial HSPA Cellular Network Router from NetComm. This manual illustrates how to set-up and configure your router appropriately for your chosen task. The
router is primarily managed and configured via a web browser. This manual will take you through the steps required to configure and use your unit correctly.
Additionally, the router may be configured via the serial (V.24) port using "AT" (V.250) commands. This method of operation is further detailed in the document: NTC-6000Series_V250 (AT)
Manual_V1-1-0.

Overview

An NTC-6000 series router allows you to build wide area networks utilizing the superior speeds supported by 3G UMTS networks. Employing an embedded 3G UMTS modem module the router
offers downlink speeds of up to 7.2Mbps and uplink speeds of up to 5.76Mbps
The NTC-6000 series provides the user a point-to-point or point-to-multi-point communications link in a single, compact and resilient unit.
As a fully featured cellular router, it supports a large number of communication interfaces and protocols to meet the demands of today's telemetry and WAN applications.
Designed with remote installation in mind the NTC-6000 series supports multi-level system monitoring giving the user peace of mind the device will keep the lines of communication up and open.
In the event of system corruption, a built-in recovery mode provides the facility to re-install the system software to the router and resume normal operations quickly. Using the recovery console is
further detailed in the document NTC-6XXX Firmware Upgrade VX.X.X.pdf that is part of all NTC-6000 series firmware upgrade packs released, which are available for download in the support
section of our website at www.netcommwireless.com .
YML6908 NTC-6000 Series User Guide
www.netcommwireless.com
5