Optional Accessories; Transmitter Controls And Connectors; Boundary Microphone Placement - Shure ULXD6 User Manual

Optional Accessories

4-bay networked charger for gooseneck and boundary
8-bay networked charger for gooseneck and boundary
8-Bay Shure Battery Charger SBC800
6' USB-A cable with wall plug for charging Wireless
Shure Lithium-Ion Rechargeable Battery SB900A

Transmitter Controls and Connectors

① Power Button
Press to power on; press and hold to power off.
② Mute/Active Button
Four settings are available for the mute/active button:
- Toggle: Press to switch between active and mute states
- Push-to-Mute: Hold button to mute microphone
- Push-to-Talk: Hold button to activate microphone
- Disabled: Button functionality off
③ Mute LED
Indicates whether microphone is active or muted. The following
settings are available:
Active
Green*
Red
Red
*MX400R series gooseneck microphones (red LED) do not offer this
setting.
④ Low-Battery LED
- Off = More than 30 minutes of battery life remain
- On (red) = Less than 30 minutes of battery life remain
- On (green) = Microphone docked on charging station
- On (amber) = Battery is missing or is not inserted correctly
⑤ Infrared (IR) Port
Align with receiver IR port to send settings to transmitter.
SBC450
microphones
SBC850
microphones
SBC-USB-A
Transmitters
Muted
Red*
Off
Flashing red
⑥ Charge Connector
Connects to networked chargers and USB power supply.
⑦ Gooseneck Microphone
ULXD8 base fits 5", 10", and 15" Microflex series microphones,
available in single or dualflex and with bi-color or red-only LEDs. See
Model Variations for full list of gooseneck options.
Connecting Gooseneck Microphone to
ULXD8 Base
ULXD8 base transmitters fit 5", 10", and 15" Microflex series gooseneck
microphones, available in single and dualflex models.
Connect microphone to base as shown.

Boundary Microphone Placement

The boundary transmitter sits on a table or desk to transmit speech while
discreetly blending into any conference environment. Cardioid and omnidi-
rectional versions are available.
For best low-frequency response and rejection of background noise, place
the microphone on a large, flat surface, such as a floor, table, or lectern.
To reduce reverberance, avoid reflective surfaces above or to the side of
the microphone, such as beveled sides of pulpits or overhanging shelves.
ULXD6/O
46 cm
(18 in.)
46 cm
(18 in.)
4
ULXD6/C
1 m
60 cm
(3 ft.)
(2 ft.)