Boundary and gooseneck base transmitters (23 pages)
Summary of Contents for Shure UR1M
Page 1
• User-adjustable RF output level (10 mW or 50 mW) • Operates with three types of primary batteries: alkaline, lithium or NiMH • Audio signal is input through a TA4F connector (UR1M) or a LEMO connector (UR1MLEMO3) • Selectable battery metering by battery type...
For additional information on the LCD Interface and controls, see UHF-R User Guide. Note: To fully interact with the Receiver, it is recommended to upgrade the UR4 firmware to 1.50 or higher and Shure Wireless Workbench to 5.0. Battery Information...
Page 3
Shure Incorporated NiMH 1000 mAH: 6 hours (normal RF power) 4 hours (high RF power) Select Battery Type: 1. Set the micro bodypack transmitter switch to on. 2. Press enter key, then scroll using button to select battery type. Press enter key to confirm.
Page 4
64 g (2.3 oz.) without batteries Wiring TA4F Connector NOTE: LAVALIER MIC TIES PINS 3 AND 4 TOGETHER—GUITAR CABLE DOES NOT. Lemo Connector UR1M Transmitter Information UR1M Transmitter RF Output: Connector: Actual Impedance: Pin Assignments: Shell = Ground Center = Signal...
99/5/EC (ETSI EN 300-422 Parts 1 & 2, EN 301 489 Parts 1 & 9) and is eligible to carry the CE marking. The CE Declaration of Conformity can be obtained from Shure Incorporated or any of its European representa...
Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the user’s re sponsibility, and licensability depends on the user’s classification and application, and on the selected frequency.