Opening And Closing The Device - Kyocera m9300 Basic Manual

Opening and Closing the Device

Your device features dual touchscreens and allows you
to work on two displays at the same time. The lower
display is located beneath the upper display and is
accessed by sliding it open. With both screens open,
you can expand the display across two displays (full-
screen mode) or use them as separate displays in
dual-screen mode. See "Using Compatible Dual-
Screen Applications" on page 26 for details.
To open the device:
Using both hands, slowly slide the upper display in
the direction of the arrow until it locks in tilt position.
Note:
When opening the device, make sure you are sliding in
the correct direction.
To make a flat display screen:
1.
When you slide the device open, slide the upper
display right to the end until it lies flat.
2.
Close a gap between the two displays by pushing
inward until you hear a click.
To close the device:
1.
With a flat display screen, grasp the right edge of
the upper display and slide it to the right to release
the lock.
2. Return the upper display to its original position as
shown in the figure below.
2A. Device Basics 17