The Wi-Fi Settings Menu; Bluetooth; Turn Bluetooth On Or Off; Change The Device Name - Kyocera DuraForce PRO 2 User Manual

Hide thumbs Also See for DuraForce PRO 2:
Table of Contents

Advertisement

NOTE: The next time your phone connects to a previously accessed secured wireless network,
you will not be prompted to enter the password again, unless you reset your phone to its
factory default settings or you instruct the phone to forget the network.
NOTE: Wi-Fi networks are self-discoverable, which means no additional steps are required for
your phone to connect to a Wi-Fi network. It may be necessary to provide a user name
and password for certain closed wireless networks.

The Wi-Fi Settings Menu

The Wi-Fi settings menu lets you turn Wi-Fi on or off, set up and connect to available Wi-Fi
networks, and configure advanced Wi-Fi options.
► From the Apps launcher, tap Settings > Network & internet > Wi-Fi.
Add network to add networks to the network list.
Wi-Fi preferences to display the setting options and information related to Wi-Fi
such as turning on Wi-Fi automatically, IP address, and more.
Wi-Fi data usage to show data usage over Wi-Fi connections over a period of time.
NOTE: Carrier data accounting may differ from device accounting.

Bluetooth

Bluetooth is a short-range communications technology that allows you to connect wirelessly to a
number of Bluetooth devices, such as headsets and hands-free car kits, and Bluetooth-enabled
handhelds, computers, printers, and wireless phones. The Bluetooth communication range is
usually approximately 30 feet.

Turn Bluetooth On or Off

Use the settings menu to enable or disable your phone's Bluetooth capabilities.
1.
From the Apps launcher, tap Settings > Connected devices > Connection
preferences > Bluetooth.
2.
Tap the ON/OFF icon to turn Bluetooth on or off.
NOTE: Turn off Bluetooth when not in use to conserve battery power, or in places
where using a wireless phone is prohibited, such as aboard an aircraft and in
hospitals.

Change the Device Name

The device name identifies your phone to other devices.
1.
From the Apps launcher, tap Settings > Connected devices > Connection
preferences > Bluetooth.
56
Connections

Advertisement

Table of Contents
loading

This manual is also suitable for:

Duraforce pro 2 at&tDuraforce pro 2 unlockedDuraforce pro 2 verizonDuraforce pro 2 firstnet

Table of Contents