Drive Redirection - Planet IKVM-1000 User Manual

Planet user's guide ip kvm switch ikvm-1000

Table of Contents

5.2.3 Drive Redirection

To use this feature, you need to install KVM Vision Viewer on the client machine.

The KVM Vision Viewer can be found in the bundled CD-ROM. Please follow the

KVM Vision Viewer Setup Wizard step by step to install the software.

Warning:

1. Drive Redirection is only possible with Windows 2000 and the latter version.

2. The Drive Redirection works on a low SCSI level and the SCSI protocol cannot

recognize partitions; therefore the whole drive selected will be shared instead

of any particular partition.

3. While connecting to a legacy KVM switch, please select PS/2 mouse for Key-

board/Mouse setting from webpage. Otherwise you will be not be able to use

Hot-key.

Create a New Device in KVM Vision Viewer

1. Start KVM Vision Viewer

2. Click on "Device" and select "New Device" to create a new device

Table of Contents