Table of Contents
Advertisement
In this page, Network Address Translation (NAT) allows you to share one
Wide Area Network (WAN) IP address for multiple computers on your Local
Area Network (LAN).
If you do not want to enable NAT, and wish the user of modem to access the
Internet normally, you need to add a route on the uplink equipment.
Otherwise, the access to the Internet fails. Normally, please enable the NAT
function.
Step 7
After setting, click Next to display the following page.
Step 8
In this page, select a preferred WAN interface as the system default
gateway interface and then click Next to display the following page.
Step 9
In this page, you may select a DNS server interface from the
available WAN interfaces. Click Next to display the following page.
47
Advertisement
Table of Contents
