Edimax AR-7288WnA Manual page 36

Step 4 In this page, you can modify the PPP username, PPP password,
PPPoE service name and authentication method.
 PPP Username: The correct user name provided by your ISP.
 PPP Password: The correct password provided by your ISP.
 PPPoE Service Name: If your ISP provides it to you, please enter it. If not,
do not enter any information.
 Authentication Method: The method to testify the entered PPP
username and password. Usually, you can select AUTO.
 Enable Fullcone NAT: NAT is one where all requests from the same
internal IP address and port are mapped to the same external IP address
and port. Furthermore, any external host can send a packet to the
internal host, by sending a packet to the mapped external address.
 Dial on demand (with idle timeout timer): If this function is enabled, you
need to enter the idle timeout time. Within the preset minutes, if the
router does not detect the flow of the user continuously, the router
automatically stops the PPPoE connection. Once it detects the flow (like
access to a webpage), the router restarts the PPPoE dialup. If this function
is disabled, the router performs PPPoE dial-up all the time.
 PPP IP extension: If you want to configure DMZ Host, you should enable it
first.
 Use Static IPv4 Address: If this function is disabled, the router obtains an
IP address assigned by uplink equipment such as BAS, through PPPoE dial-
36