Service Mode - JVC KW-NX7000J Service Manual

4.6.2 Service mode 2

Keep this state more 2 seconds
while continuing pressing the
[DISP] button, [MAP] button and
TOUCH PANEL [DOWN] button
sequentially.
Screen indication
SERVICE MODE 2
INITIALIZE ALL
INITIALIZE
INITIALIZE DVD
INITIALIZE BT
TOUCH PANEL CARIBRATION
TOUCH PANEL CHECK MODE
Exchanging it operate a menu of a service mode with the [UP] button and [DOWN] button.
Operate choice of a menu with a [ENTER] button.
INITIALIZE ALL
INITIALIZE
INITIALIZE DVD
INITIALIZE BT
TOUCH PANEL CALIBRATION
TOUCH PANEL CHECK MODE
NOW...
INITIALIZE ALL
INITIALIZE ALL
OK***
NOW...
INITIALIZE
INITIALIZE
OK***
Full initialization of EEPROM of a DVD unit
( It is included a permanent domain)
After clear completion, this indication is continued
INITIALIZE DVD
till an effective key is input.
OK***
Full initialization of EEPROM of Bluetooth ( Module/Hideaway )
After clear completion, this indication is continued
till an effective key is input.
INITIALIZE BT
OK***
Push the center of a + character displayed in turn.
The confirmation mode that the calibration of the
touch panel was performed definitely.
*Return to previous menu with a [DISP] button.
INITIALIZE ALL
(Each EEPROM is initialized by a factory shipment state.)
Main micon EEPROM initialization (user entry domain, error
history, speaker setting, subarea of J-version, data to pre-set )
Panel micon EEPROM initialization (picture adjustment data)
DVD unit EEPROM initialization (except a permanent domain)
Bluetooth (Module/Hideaway) EEPROM initialization
NAVI unit initialization
After clear completion, a screen returns to normal indication
after OK indication was displayed for three seconds.
INITIALIZE (Initialization of a user area of each EEPROM)
Main micon EEPROM initialization (a user entry domain )
(a user entry domain, speaker setting, subarea of J-version,
data to pre-set )
Panel micon EEPROM initialization (picture adjustment data )
DVD unit EEPROM initialization (except a permanent domain)
Bluetooth (Module/Hideaway) EEPROM initialization
After clear completion, a screen returns to normal indication
after OK indication was displayed for three seconds.
(No.MA427<Rev.001>)1-25