Asus ROG RAMPAGE VI EXTREME Manual page 46

17. Water in, water out, and water flow connectors (2-pin W_IN; 2-pin W_OUT;
3-pin W_FLOW)
These connectors allow you to connect sensors to monitor the temperature and flow
rate of your liquid cooling system. You can manually adjust the fans and water pump to
optimize the thermal efficiency of your liquid cooling system.
18. Water Block connector (9-pin WB_SENSOR)
This connector allows you to connect a water block connector to monitor the
temperature, flow rate, and water leak signals of your third party monoblocks. You can
manually adjust the fans and water pump to optimize the thermal efficiency of your
third party monoblocks.
1-30
Chapter 1: Product Introduction