Table of Contents
Advertisement
2. INSTALLATION
This section describes the functionalities of the Gigabit Ethernet
Switch's components and guides how to install it on the desktop.
Basic knowledge of networking is assumed. Please read this chapter
completely before continuing.
2.1 Product Description
The PLANET Gigabit Ethernet Switch is 10/100/1000Mbps Gigabit
Ethernet Switch with 16/24 ports respectively, and non-blocking wire-
speed performance. With 32/48Gbps internal switching fabric, the
Gigabit Ethernet Switch can handle extremely large amounts of data in
a secure topology linking to a backbone or high capacity servers.
The Gigabit Ethernet Switch has 8K MAC Address table and provides
340/400/500K bytes buffer memory. The Gigabit Ethernet Switch offers
wire-speed packets transfer performance without risk of packet loss.
The high data throughput of Gigabit Ethernet Switch makes it ideal
for most Gigabit environments, especially while network upgrades to a
Gigabit environment.
All RJ-45 copper interfaces support 10/100/1000Mbps Auto-Negotiation
for optimal speed detection through RJ-45 Category 6, 5 or 5e cables.
Support standard for Auto-MDI/MDI-X that can detect the type of
connection to any Ethernet device without requiring special straight or
crossover cables, the GSW-2416 provide 24 10/100/1000Base-T ports
and together with 16-SFP(Small Form-factor Pluggable). Shared with
port #9 to port #24, make the GSW-2416 be a 16-Port Gigabit fiber
Switch with mini-GBIC fiber-optic module installed that shall provide
long distance fiber connectivity.
2.1.1 Product Overview
The PLANET Gigabit Ethernet Switch with 16/24 RJ-45 10/100/1000Mbps
ports for high-speed network connectivity. The Gigabit Ethernet Switch
can also automatically identify and determine the correct transmission
speed and half/full duplex mode of the attached devices with its 16/24
ports. The Gigabit port with jumbo frame feature supported, can handle
10
Hide quick links:
Advertisement
Table of Contents
