Priority Channel Watch During Group Scan; Programming Scan Channels - Uniden UH510 Series Owner's Manual

Operation
Group Scan(GS) Mode
1. Press (menu) three times. GS
2. Press (ch) or
(menu) to save and exit.
To initiate scanning,
vol scan
begins.
1. If SCAN is deactivated while it is tuned to an active
Scan start channel.
NOTE
and scanning will not start.

Priority Channel Watch During Group Scan

The feature monitors the Priority channel every 1.5 secs during GS.
1. Press (menu) four times. Pr
2. Press (ch) or
(menu) to save and exit.

Programming Scan Channels

2. Select the channel you want to store by pressing (ch)
3. Press and hold vol
M icon appears.
remove. M icon disappears.
Drop-Out Delay
UNIDEN UH510/UH515
or (vol) or to change the selection.
(PTT) or press and hold vol
or (vol) or to select the desired channel.
(mem) to store.
8
(scan).
or .
vol (mem) to
UHF CB Radio