Sony HT-MT500 Operating Instructions Manual page 44

System Power Off Function
When you turn off the TV, the system
will turn off automatically.
Set [System Settings] - [HDMI Settings] -
[Standby Linked to TV] on the system to
[On] or [Auto] (page 49). The default
setting is [Auto].
System Audio Control
Function
If you turn on the system while you are
watching the TV, the TV sound will be
output from the speakers of the system.
The volume of the system can be
adjusted using the TV's remote control.
If the TV sound was output from the
speakers of the system the previous
time you watched the TV, the system
will be turned on automatically when
you turn on the TV again.
Operations can also be made by the
TV's menu. For details, refer to the
operating instructions of your TV.
Notes
• Sound is only output from the TV if other
than [TV] input is selected when using the
Twin Picture function on the TV. When
you disable the Twin Picture function, the
sound is output from the system.
• The number for the system's volume level
is displayed on the TV screen depending
on the TV. The volume number displayed
on the TV may differ from the number on
the front panel display of the system.
• Depending on the settings of the TV, the
System Audio Control function may not
be available. For details, refer to the
operating instructions of your TV.
Audio Return Channel
If the system is connected to a TV's
HDMI IN jack compatible with Audio
Return Channel (ARC), you can listen to
44
GB
TV sound from the speakers of the
system without connecting an optical
digital cable.
On the system, turn [System Settings] -
[HDMI Settings] - [TV Audio Input Mode]
to [Auto] (page 49). The default setting
is [Auto].
Note
If the TV is not compatible with Audio
Return Channel, the optical digital cable
(not supplied) needs to be connected (refer
to the supplied Startup Guide).
One-Touch Play Function
When you play content on a device (Blu-
ray Disc player, "PlayStation
connected to the TV, the system and TV
are turned on automatically, the input of
the system is switched to the input for
the TV, and sound is output from the
speakers of the system.
Note
Depending on the TV, the beginning part
of content being played may not play
correctly.
Menu Operation by TV
Remote Control
You can select the system using the
SYNC MENU button on the TV remote
control and operate the system.
This function can be used if the TV
supports the link menu. For details, refer
to the operating instructions of your TV.
Notes
• In the TV's link menu, the system is
recognized by the TV as "Player."
• Some operations may not be available
with some TVs.
4," etc.)
®