Bosch GBH 14,4 V-LI Compact Professional Original Instructions Manual page 12

OBJ_BUCH-1331-005.book Page 12 Monday, September 19, 2016 8:49 AM
12 | English
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-6.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
Mounting and Operation
The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Action
Removing the battery
Inserting the battery
Checking the battery charge
condition
Inserting SDS-plus Drilling Tools
Removing SDS-plus Drilling Tools
Selecting the operating mode and
rotation direction
Switching on and off and setting the
speed
Selecting Accessories
1 609 92A 2MF | (19.9.16)
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Figure Please observe
1
2
3
4
5
6
7
–
Page
178
178
178
179
179
180
181
182
Bosch Power Tools